Leibinger JET3, Руководство по эксплуатации

Страница: 260 / 406

Page 258 Job Editor Group 8
Release 2.02 JET3 Series
8.5.1.4 Print mode
The print mode is selected from the <Print mode > drop-down list. There are 12 printing
modes available.
The print modes are classified in three categories: the maximum number of vertical dots
per line, the print quality and the printing speed. You can either aim for high print quality
or high speed. There are five different values for the dots and three modes for quality
respective speed available whereby not all combinations of these criteria are possible.

Available dot modes:
32, 24, 16, 12, 5 and 2-line 7x5
 High quality mode:
This mode allows the best possible positioning of the single
dots and therefore the best possible print quality. Change to
fast mode if the required speed cannot be reached in HQ-
mode.
 Fast mode:
This mode is a good compromise between quality and
speed. Change to high speed mode if the required speed
cannot be reached in HQ-mode.
 Speed mode
The <Speed mode> is located between the <Fast mode>
and the <High speed mode>.
 High speed mode:
This mode ensures the fastest possible print speed. The
quality of the printout is not optimal but acceptable.
Figure 139 Font parameters - Print mode