Leibinger JET3, Руководство по эксплуатации

Страница: 132 / 406

Page 130 Job Editor Group 8
Release 2.02 JET3 Series
Proceeding:
 Press on the tab < Interfaces> (2) to select the tab.
 Press on the arrow key of the drop-down list <Encoder Settings> (3) . The drop-down
list opens for selection.
 Now select the required interface.
 If required activate now the bounce time delay by clicking on the check box (4) . An
activated delay is displayed by

in the check box.
Figure 50 Select encoder interface
Bounce time delay is switched off Bounce time delay is switched on
1 – Dialog box <Basic Settings> 3 – Drop-down list <Encoder settings>
2 – Tab < Interfaces> 4 – Check box <Bounce time delay off>
Pos. Interface Describtion
1. RS422 5V / 4 Signals (A, Ā, B, B)
2. TTL 5V TTL / 2 Signals (A, B)
3. HTL 24V / 2 Signals (A, B)
2
1
3
4