Galaxy Flex Installer Manual
Codes [42, Quick Menu 7]
69
Camera [42.1.User code.11]
1=During Exit
Use this option to associate a camera with a user so that the user’s
image is captured when setting the system. The options are:
0=Disabled
,
1=Enabled
.
2=Duress
Use this option to define a photo sequence that will be taken when
the Duress code is used. This option is available to duress code users
only.
0=Disabled, 1=Enabled
. When enabled, you can scroll
through a list of cameras from which to select. Press
ent
to select a
camera.
Card Users [42.2]
This option determines the tags/cards on the system for various users. There are seven
options:
Add Batch [42.2.1]
Use this option to start enrolment and display the user/tag for each presentation. When batch
enrolling (auto assigning of tags to users), the panel increments the user number starting
from Batch Start. It does this for every new tag presented at the DCM assigned in Batch
DCM.
Test Batch [42.2.2]
Use this option to check the stored tag number with the tag presented at the Batch DCM. It
can also be used to go directly to the user programming details that are assigned to the tag
presented.
Delete Batch [42.2.3]
Use this option to remove card numbers from enrolment. A warning is given before deletion.
Batch Start [42.2.4]
Use this option to determine the user number at which enrolment starts.
Batch End [42.2.5]
Use this option to determine the user number at which enrolment ends.
Batch DCM Rdr [42.2.6]
Use this option to select the DCM reader for enrolment. Press
#
to return to the default
setting which is any reader.
Template User [42.2.7]
Use this option to turn a user’s access authority and non-unique attributes into a template.
RF Batch Learn [42.3]
Use this option to configure several wireless peripherals on the system in a single learn
process (see 52.3=Batch Learn on page 111).
