Program Zones [52]
Galaxy Flex Installer Manual
106
Press
#
to toggle the descriptor to reveal the status of the chime, omit and part attributes. If
the attribute is enabled, the initial attribute letter is displayed, if it is disabled, a dash (–) is
shown. For example, chime, part and omit enabled display as COP, if omit is disabled the
display would be C – P.
Use
A
or
B
to scroll through the zones, or enter the address of a specific zone.
Press
ent
to programme a zone. The first programming attribute
1=Function
is displayed.
Attributes
On entering programming mode for a zone as described above, use
A
or
B
to scroll to an
attribute, or enter an attribute number directly, and then press
ent
.
Press
ent
to save the programming and return to the attribute selection level.
Press
esc
at any time when assigning attributes 1 and 3 to 13 to abort programming and
return to the attribute selection level. When the attribute is
2=Descriptor
the assigned alpha-
numeric text is saved.
1=Function
The Function attribute displays the address and the current function of the selected zone
along with the zone function reference number. You can scroll through the zone functions or
you can enter a zone function reference number directly, for example, enter 19 to display
zone function
19=FIRE
. For zone function details, see
Zone Function menu
on page 111
and subsequent pages.
Once the required zone function is displayed, press
ent
to assign it to the zone.
2=Descriptor
Use this attribute to add an alpha-numeric descriptor of up to 16 characters to a zone. You
can use the inbuilt character set and/or library options.
When you enter the attribute, the current descriptor (blank by default) is displayed on the top
line and an underscore shows where the next character will be positioned. A selection of the
alphabet is shown on the bottom line and the cursor flashes on the letter L.
Press
to erase the characters already assigned to the descriptor.
Use
A
or
B
to move the alphabet left or right until the required character is positioned
underneath the flashing cursor. When the required character is in position press
ent
to copy
the character to the descriptor on the top line. Repeat this procedure to assemble the required
zone descriptor.
Text Case and Library
When you enter the attribute the alpha-numeric characters are presented in upper case. Press
#
to
toggle the characters to lower case.
Press
#
when the lower case alphanumeric characters are displayed to toggle to the library
words. Use
A
or
B
to scroll through the words,
or enter a reference number directly (see
Appendix A: Library
). When the required word is displayed, press
ent
to copy it to the
descriptor.
