Access Control [69]
Galaxy Flex Installer Manual
192
DCM Security Dual mode [69.3.1.5.06.3]
This defines if access at a door requires dual authority or not via the assigned keypad. The
options are:
0=Disabled
A card or a PIN is required to gain access.
1=Card and Card
Two cards are required to gain access.
2=Card and Pin
A card and a PIN from the same user are required to gain access.
DCM Security Dual Time [69.3.1.5.06.4]
Option not available.
DCM Menu Recall [69.3.1.5.07]
This determines whether the user is allowed to apply the menu recall function at any DCM
reader. This is in addition to any DCM function that may be assigned. There are three
options as follows.
DCM Menu Recall Menu Function [69.3.1.5.07.1]
Depending on the level of access granted in
Menu Access [68]
, the user can use their card at
a compatible reader to activate a single menu function selected from the available list (11-
72). To assign a new option press
A
or
B
until the required option is displayed, or enter the
option number directly, and then press
ent
to accept the selection. Assign a double asterisk
(
) to make the menu function not used.
DCM Menu Recall Menu Mode [69.3.1.5.07.2]
Use this option to control the menu function. There are two options:
1=Triple Repeat
The card is presented to the reader three times to activate the menu.
2=Recall Button
The recall button is pressed once to activate the menu.
DCM Menu Recall Keypad assignment [69.3.1.5.07.3]
Use this option to assign a specific keypad address to work in conjunction with a DCM. This
keypad is used to display the menu action assigned in
1=Menu Function
.
Card Format [69.3.2]
Use this option to select the type of card used with the DCM reader. There are five options:
0=26 bit, 1=Crp 1K 35 bit, 2=37 bit no FC, 3=Northern 34 bit, 4=Custom.
4=Custom has a further four sub-options:
1=Format Name
The maximum number of characters in the name is 12.
2=Card Length
Bit size options: 26, 27, 32, 34, 35, 37 or 40.
