Hach DR/850 Скачать руководство пользователя страница 93

Страница: 93 / 460

CHLORAMINE, MONO, High Range

(0–10.0 mg/L Cl

) Method

10172

Indophenol Method

For chlorinated drinking water and chlorinated wastewater

* U.S. Patent 6,315,950

Enter the user

program number for
Chloramine, HR.

Press:

PRGM

The display will show:

PRGM?

Note:

For most accurate

results, perform a Reagent
Blank Correction (Section
1 of the DR/800 Instrument
Manual).

Press:

111 ENTER

The display will show:

mg/L Cl

and then

Zero

Note:

For alternate forms,

press the

CONC

key.

Insert the COD/TNT

Vial Adapter into the
cell holder by rotating
the adapter until it drops
in place. Push down to
fully insert it.

Note:

For better

performance, adiffuser
band covers the light path
holes on the adapter. Do
not remove the band.

Remove the cap

from one HR
Monochloramine
Diluent vial. Use a glass
pipet to add 2.0 mL of
sample to the vial.
Re-cap and invert
several times to mix.

Wipe the outside of

the vial clean.

Place the vial into the
adapter. Cover the
sample vial tightly with
the instrument cap.

Press:

ZERO

The cursor will move to
the right and the display
will show:

0.0 mg/L Cl

Remove the vial

from the cell holder,
uncap, and add the
contents of one
Monochlor–F pillow to
the sample. Cap and
shake the vial about
20 seconds to dissolve.

Note:

Use the microfunnel

as an aid in adding reagent
powder to the vial.

Press:

TIMER ENTER

A five-minute reaction
period will begin.

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 93 / 460

Результаты поиска

Содержание DR/850

Отзывы: