manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 359 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 359

359

Method 8180

PHOSPHORUS, ACID HYDROLYZABLE 

 

Hydrolysis to Orthophosphate Method

*

 

For water, wastewater, seawater

* Adapted from 

Standard Methods for the Examination of Water and Wastewater.

1.

Measure 25 mL of 

sample into a 50-mL 
erlenmeyer flask using a 
graduated cylinder.

Note:

Wash all glassware 

with 6 N hydrochloric acid. 
Rinse with deionized water. 
Do not use detergents 
containing phosphate to 
clean glassware.

2.

Add 2.0 mL of 

5.25 N Sulfuric Acid 
Solution.

Note:

Use the 1-mL 

calibrated dropper 
provided.

3.

Place the flask (the 

prepared sample) on a 
hot plate.  Boil gently for 
30 minutes.

Note:

Samples should be 

concentrated to less than 
20 mL for best recovery. 
After concentration, 
maintain the volume near 
20 mL by adding small 
amounts of deionized water.  
Do not exceed 20 mL.

4.

Cool the hot 

prepared sample to room 
temperature.

30:00
minutes

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов