Hach DR/850 Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 460

Hach DR/850 Скачать руководство пользователя страница 118

118

5.

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0.00 mg/L Cl2

Note:

If Reagent Blank

Correction is on, the
display may flash “limit”.
See Section 1.

6.

Fill another cell with

10 mL of sample.

7.

Add the contents of

one DPD Free Chlorine
Powder Pillow to the
sample cell (the
prepared sample). Cap
the cell and swirl
vigorously to dissolve
the powder.

Note:

A pink color will

develop if free chlorine is
present.

8.

Immediately place

the prepared sample into
the cell holder. Tightly
cover the sample cell
with the instrument cap.

Note:

Perform Step 9

within one minute of
reagent addition.

9.

Press:

READ

The cursor will move to
the right, then the result
in mg/L chlorine will
be displayed.

Note:

Standard Adjust may

be performed using a
prepared standard
(see Section 1).

Note:

If the sample

temporarily turns yellow
after reagent addition, or
the display flashes “limit”,
it is due to high chlorine
levels. Dilute a fresh
sample and repeat the test.
A slight loss of chlorine
may occur during dilution.
Multiply the result by the
dilution factor; see Section
1. Or, use the High Range
Free Chlorine test,
program #8.

CHLORINE, FREE,

continued

«
...
116
117
118
119
120
...
»

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов