Hach DR/850 Скачать руководство пользователя страница 209

Страница: 209 / 460

209

Using AccuVac Ampuls

Enter the stored

program number for iron
(Fe)- AccuVac Ampuls.

Press:

PRGM

The display will show:

PRGM ?

Note:

For most accurate

results, perform a Reagent
Blank Correction using
deionized water (see
Section 1).

Note:

Adjust the pH of

stored samples before
analysis.

Press:

39 ENTER

The display will show

mg/L, Fe

and the

ZERO

icon

Note:

Total iron

determination needs a
prior digestion. Use any of
the three procedures in
Digestion (Section 2).

Fill a sample cell

with at least 10 mL of
sample (the blank).
Collect at least 40 mL of
sample in a 50-mL
beaker.

Note:

Sample pH is

important in this test; see
Interferences.

Note:

Rinse glassware with

a 1:1 hydrochloric acid and
deionized water before use
to avoid errors due to iron
deposits on the glass.

Fill a TPTZ Iron

AccuVac Ampul
with sample.

Note:

Keep the tip

immersed while the ampul
fills completely.

Invert the ampul (the

prepared sample)
repeatedly to mix. Wipe
off any liquid or
fingerprints.

Note:

A blue color will

develop if iron is present.

Press:

TIMER ENTER

A three-minute reaction
period will begin.

Place the blank into

the cell holder. Tightly
cover the sample cell
with the instrument cap.

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0.00 mg/L Fe

Note:

Press

EXIT

to zero

the instrument while the
timer is running.

Note:

If Reagent Blank

Correction is on, the
display may flash “limit”.
See Section 1.

IRON, TOTAL,

continued

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 209 / 460

Результаты поиска

Содержание DR/850

Отзывы: