Hach DR/850 Скачать руководство пользователя страница 191

Страница: 191 / 460

191

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0.00 mg/L Fe

Fill a Ferrous

Iron AccuVac Ampul
with sample.

Note:

Keep the tip

immersed while the ampul
fills completely.

Quickly invert the

ampul several times to
mix. Wipe off any liquid
or fingerprints.

Note:

Undissolved powder

does not affect accuracy.

Press:

TIMER ENTER

A three-minute reaction
period will begin.

Note:

An orange color

will form if ferrous iron
is present.

Place the AccuVac

ampul into the cell
holder. Tightly cover the
sample cell with the
instrument cap.

10.

Press:

READ

The cursor will move to
the right, then the result
in mg/L ferrous iron will
be displayed.

Note:

Standard Adjust may

be performed using a
prepared standard (see
Standard Adjust in
Section 1).

IRON, FERROUS,

continued

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 191 / 460

Результаты поиска

Содержание DR/850

Отзывы: