manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 356 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 356

356

Sampling and Storage

Collect samples in plastic or glass bottles that have been acid-
washed with 1:1 HCl and rinsed with deionized water. Do not use 
detergents containing phosphates for cleaning glassware used in 
this test.

Analyze samples immediately after collection for best results. If 
prompt analysis is impossible, preserve samples up to 28 days by 
adjusting the pH to 2 or less with concentrated sulfuric acid 
(about 2 mL per liter) and storing at 4 °C. Warm to room 
temperature before testing. Correct results for volume additions; 
see 

Volume Additions

 (Section 1) for more information.

Interferences

For turbid samples, use 50 mL of sample and double the reagent 
quantities.  Use digested sample to zero the instrument in the 
reactive phosphorus procedure.  This compensates for any color 
or turbidity destroyed by this procedure.  For alkaline or highly 
buffered samples it may be necessary to add additional acid in 
Step 3 to drop the pH of the solution below 1.

5.

Cool the sample to 

room temperature.

6.

Add 2.0 mL of 

5.0 N Sodium Hydroxide 
Solution.  Swirl to mix.

Note:

Use the 

1-mL calibrated 
dropper provided.

7.

Pour the sample into 

a 25-mL graduated 
cylinder.  Return the 
volume to 25 mL.  
Proceed with a reactive 
phosphorus test of the 
expected total 
phosphorus 
concentration range.

Note:

Use deionized water 

rinsings from the flask to 
adjust the volume.

Note:

Results of the 

reactive phosphorus test at 
this point will include the 
organic phosphate plus the 
orthophosphate and the 
acid-hydrolyzable 
(condensed) phosphate. 
The organic phosphate 
concentration is 
determined by subtracting 
results of an acid 
hydrolyzable phosphorus 
test from this result. Make 
sure that both results are in 
the same units before 
taking the difference.

PHOSPHORUS, TOTAL, 

continued

 

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов