Hach DR/850 Скачать руководство пользователя страница 131 | Manualshive

Страница: 131 / 460

Hach DR/850 Скачать руководство пользователя страница 131

131

Interferences

Summary of Method

Chlorine can be present in water as free available chlorine and as
combined available chlorine. Both forms can exist in the same
water and be determined together as the total available chlorine.
Free chlorine is present as hypochlorous acid and/or hypochlorite
ion. Combined chlorine exists as monochloramine, dichloramine,
nitrogen trichloride and other chloro derivatives.

The combined chlorine oxidizes iodide in the reagent to iodine.
The iodine reacts with DPD (N, N-diethyl-p-phenylenediamine)

Interfering Substance

Interference Level and Treatment

Acidity

Greater than 150 mg/L CaCO

3

. May not develop full color

or color may fade instantly. Neutralize to pH 6-7 with 1 N
sodium hydroxide. Determine amount to be added on
separate sample aliquot, then add the same amount to the
sample being tested. Correct for volume addition (See

Section 1,

Correcting for

Volume Additions

).

Alkalinity

Greater than 250 mg/L CaCO

3

. May not develop full color

or color may fade instantly. Neutralize to pH 6-7 with 1 N
sulfuric acid. Determine amount to be added on separate
sample aliquot, then add the same amount to the sample
being tested. Correct for volume addition (See

Section 1

,

Correcting for
Volume Additions

).

Bromine

Interferes at all levels

Chlorine Dioxide

Interferes at all levels

Chloramines, organic

May interfere

Hardness

No effect at less than 1,000 mg/L as CaCO

3

Iodine

Interferes at all levels

Manganese, Oxidized
(Mn

4+

, Mn

7+

)

or
Chromium , Oxidized
(Cr

6+

)

1.

Adjust sample pH to 6-7.

2.

Add 3 drops potassium iodide (30 g/L) to a 25-mL sample.

3.

Mix and wait one minute.

4.

Add 3 drops sodium arsenite (5 g/L) and mix.

5.

Analyze 10 mL of the treated sample as described in the
procedure.

6.

Subtract the result from this test from the original analysis
to obtain the correct chlorine concentration.

Ozone

Interferes at all levels

Peroxides

May interfere

Extreme sample pH and
highly buffered samples

Adjust to pH 6-7. See

Interferences,

Section 1

.

CHLORINE, TOTAL,

continued

«
...
129
130
131
132
133
...
»

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов