Hach DR/850 Скачать руководство пользователя страница 119

Страница: 119 / 460

119

Using AccuVac Ampuls

Enter the stored

program number for free
and total chlorine (Cl

AccuVac Ampuls.

Press:

PRGM

The display will show:

PRGM ?

Note:

For most accurate

results, perform a Reagent
Blank Correction using
deionized water (see
Section 1).

Press:

11 ENTER

The display will show

mg/L, Cl2

and the

ZERO

icon.

Fill a sample cell

with at least 10 mL of
sample (the blank).
Collect at least 40 mL of
sample in a 50-mL
beaker.

Note:

Samples must be

analyzed immediately and
cannot be preserved for
later analysis.

Place the blank into

the cell holder. Tightly
cover the sample cell
with the instrument cap.

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0.00 mg/L Cl2

Note:

If Reagent Blank

Correction is on, the
display may flash “limit”.
See Section 1.

Fill a DPD

Free Chlorine Reagent
AccuVac Ampul
with sample.

Note:

Keep the tip

immersed while the ampule
fills completely.

Quickly invert the

ampule several times to
mix. Wipe off any liquid
or fingerprints.

Note:

A pink color will

form if chlorine is present.

Immediately place

the AccuVac Ampul into
the cell holder. Tightly
cover the ampule with
the instrument cap.

Note:

Perform step 9

within one minute of
reagent addition.

CHLORINE, FREE

continued

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 119 / 460

Результаты поиска

Содержание DR/850

Отзывы: