manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 105 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 105

105

Summary of Method

The range of analysis using the DPD method for free chlorine can 
be extended by adding more indicator in proportion to sample 
volume. Thus, a larger fill powder pillow of DPD Free Chlorine 
Reagent is added to a 5-mL sample portion.

Chlorine in the sample as hypochlorous acid or hypochlorite ion 
(free chlorine or free available chlorine) reacts immediately with 
DPD (N,N-diethyl-p-phenylenediamine) indicator to form a pink 
color which is proportional in intensity to the chlorine 
concentration.

Instrument Setup

The following procedure will add this method as a new Hach 
program to a DR/800 instrument.

1.

Turn on the instrument by pressing the 

ON

 key.

2.

Press the 

SETUP

 key.

3.

Press the 

DOWN

 arrow key until the prompt line shows 

USER.

4.

Press the 

ENTER

 key.

5.

Enter “8138”, followed by 

ENTER

.

Monochloramine

For conventional free chlorine disinfection (beyond the breakpoint), monochlora-
mine concentrations are very low. If monochloramine is present in the sample, its 
interference in the free chlorine test varies with the sample temperature, the rela-
tive amount of monochloramine to free chlorine, and the time required to do the 
analysis. Approximate interference levels of monochloramine in the free chlorine 
test are listed below (as mg/L Cl

2

).

Ozone

Interferes at all levels

Peroxides

May interfere

Extreme sample pH or highly 
buffered samples

Adjust the sample pH to 6–7 with Sulfuric Acid or Sodium Hydroxide

Interfering Substance

Interference Levels and Treatments

NH

2

Cl

Sample Temperature °C (°F)

(as Cl

2

)

5 (40)

10 (50)

20 (68)

30(83)

1.2

0.2

0.2

0.3

0.3

2.5

0.4

0.5

0.6

0.6

3.5

0.5

0.6

0.7

0.8

CHLORINE, FREE, Ultra-high Range, continued 

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов