Hach DR/850 Скачать руководство пользователя страница 250

Страница: 250 / 460

250

Press:

TIMER ENTER

A 15-minute reaction
period will begin.

Note:

A pink color will

develop if nitrite is present.

When the timer

beeps, fill an empty
sample cell with 10 mL
of sample (the blank).

Wipe the outside of

the sample cell with a
towel. Place the blank
into the cell holder.
Tightly cover the sample
cell with the instrument
cap.

Note:

Wiping with a damp

cloth, followed by a dry
pne, removes fingerprints
and other marks.

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0.000 mg/L NO2-N

Note:

If Reagent Blank

Correction is on, the
display may flash “limit.”
See Section 1.

Place the prepared

sample into the cell
holder. Tightly cover the
sample cell with the
instrument cap.

10.

Press:

READ

The cursor will move to
the right, then the result
in mg/L nitrite nitrogen
(or an alternate form)
will be displayed.

NITRITE, Low Range,

continued

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 250 / 460

Результаты поиска

Содержание DR/850

Отзывы: