Hach DR/850 Скачать руководство пользователя страница 371

Страница: 371 / 460

371

Method 8180

PHOSPHORUS, ACID HYDROLYZABLE

(0.00 to 5.00 mg/L PO

)

PhosVer 3 with Acid Hydrolysis

For water, wastewater, and seawater

Test ’N Tube

™

Procedure

Turn on the COD

Reactor. Heat to 150 °C.

Note:

See DRB200

instrument manual for
selecting preprogrammed
temperature applications.

Enter the stored

program number for acid
hydrolyzable phosphorus
(PO

), Test ‘N Tube.

Press:

PRGM

The display will show:

PRGM

Note:

For most accurate

results, perform a Reagent
Blank Correction using
deionized water (see
Section 1).

Press:

82 ENTER

The display will show

mg/L, PO4

and the

ZERO

icon

Note:

For alternate forms

(P, P

), press the

CONC

key.

Insert the COD/TNT

Adapter into the cell
holder by rotating the
adapter until it drops into
place. Then push down
to fully insert it.

Note:

A diffuser band

covers the light path holes
on the adapter to give
increased performance.
The band should NOT be
removed.

Use a TenSette

Pipet

to add 5.0 mL of sample
to a Total and Acid
Hydrolyzable Test Vial.
Cap and mix.

Heat the vial in the

DRB200 Reactor for
30 minutes.

Carefully remove the

vial from the reactor.
Place it in a test tube
rack and allow to cool to
room temperature.

Note:

Vials will be hot.

Remove the cap from

the vial. Use a TenSette
Pipet to add 2.0 mL of
1.00 N sodium
hydroxide to the vial.
Cap and mix.

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 371 / 460

Результаты поиска

Содержание DR/850

Отзывы: