Hach DR/850 Скачать руководство пользователя страница 364

Страница: 364 / 460

364

Clean the outside of

the vial with a towel.

Note:

Wiping with a damp

towel, followed by a dry
one, will remove
fingerprints or other marks.

Place the sample vial

into the adapter.

Push straight down on
the top of the vial until it
seats solidly into the
adapter.

Note:

Do not move the vial

from side to side as this can
cause errors.

Tightly cover the

sample vial with the
instrument cap.

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0.00 mg/L PO4

Note:

For multiple

samples, zero only on the
first sample. Read the
remaining samples after
adding the PhosVer 3
Reagent.

Using a funnel, add

the contents of one
PhosVer 3 Phosphate
Powder Pillow to the
vial.

10.

Cap the vial tightly

and shake for 10-15
seconds.

Note:

The powder will not

completely dissolve.

11.

Press:

TIMER ENTER

A 2-minute reaction
time will begin.

Note:

Read samples

between 2 and 8 minutes
after the addition of the
PhosVer 3 reagent.

Note:

A blue color will

develop if phosphate is
present.

12.

Immediately after

the timer beeps, place
the sample vial in the
adapter.

Push straight down on
the top of the vial until it
seats solidly into the
adapter.

Note:

Do not move the vial

from side to side as this can
cause errors.

PHOSPHORUS, REACTIVE,

continued

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 364 / 460

Результаты поиска

Содержание DR/850

Отзывы: