Hach DR/850 Скачать руководство пользователя страница 380

Страница: 380 / 460

380

Carefully remove the

vial from the reactor.
Place it in a test tube
rack and allow to cool to
room temperature.

Note:

Vials will be hot.

10.

Use a TenSette

Pipet to add 2.0 mL of
1.54 N sodium
hydroxide to the vial.
Cap and mix.

11.

Clean the outside of

the vial with a towel.

Note:

Wiping with a damp

towel, followed by a dry
one, will remove
fingerprints or other marks.

12.

Place the sample

vial in the adapter.

Push straight down on
the top of the vial until it
seats solidly into the
adapter.

Note:

Do not move the vial

from side to side as this can
cause errors.

13.

Tightly cover the

vial with the instrument
cap.

14.

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0.00 mg/L PO4

Note:

For multiple

samples, zero only on the
first sample. Read the
remaining samples after
adding the PhosVer 3
reagent.

15.

Remove the cap

from the vial. Using a
funnel, add the contents
of one PhosVer 3
Phosphate Reagent
Powder Pillow to the
vial.

16.

Cap tightly and

shake for 10-15 seconds.

Note:

The powder will not

completely dissolve.

PHOSPHORUS, TOTAL,

continued

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 380 / 460

Результаты поиска

Содержание DR/850

Отзывы: