Hach DR/850 Скачать руководство пользователя страница 195

Страница: 195 / 460

195

Method 8008

IRON, TOTAL

(0 to 3.00 mg/L)

For water, wastewater, and seawater

FerroVer Method

(Powder Pillows or AccuVac Ampuls)

USEPA approved for reporting wastewater analysis (digestion is required; see Section 2

)

Enter the stored

program number for iron
(Fe) powder pillows.

Press:

PRGM

The display will show:

PRGM ?

Note:

Determination of

total iron requires a
digestion prior to analysis
(see Section 2).

Note:

Adjust pH of stored

samples before analysis.

Press:

33 ENTER

The display will show

mg/L, Fe

and the

ZERO

icon

Fill a clean sample

cell with 10 mL
of sample (the blank).

Note:

For turbid samples,

treat the blank with one
0.1-gram scoop of RoVer
Rust Remover. Swirl to mix.

Place the blank into

the cell holder. Tightly
cover the sample cell
with the instrument cap.

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0.00 mg/L Fe

Fill another sample

cell with 10 mL
of sample.

Add the contents of

one FerroVer Iron
Reagent Powder Pillow
to the sample cell (the
prepared sample). Cap
and invert to dissolve the
reagent powder.

Note:

Accuracy is not

affected by undissolved
powder.

Press:

TIMER ENTER

A three-minute reaction
period will begin.

Note:

An orange color will

form if iron is present.

Note:

Samples containing

visible rust should be
allowed to react at least
five minutes.

Federal Register

, 45 (126) 43459 (June 27, 1980). See also 40 CFR, part 136.3, Table IB.

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 195 / 460

Результаты поиска

Содержание DR/850

Отзывы: