Hach DR/850 Скачать руководство пользователя страница 418

Страница: 418 / 460

418

After the timer

beeps, remove the
stopper and drain the
bottom water layer.
Discard this layer.

Note:

Benzene solutions

are a regulated waste and
cannot be poured down the
drain. See Section 3 for
proper disposal of these
materials.

10.

Drain the top

benzene layer into a
clean sample cell (the
prepared sample).

Note:

The benzene layer

cannot be filtered before
color measurement.
Filtration removes the
blue color.

11.

Fill another sample

cell to the 25-mL mark
with pure benzene
(the blank).

12.

Place the blank in

the cell holder. Tightly
cover the sample cell
with the instrument cap.

13.

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0.000 mg/L LAS

14.

Place the prepared

sample into the cell
holder. Tightly cover the
sample cell with the
instrument cap.

15.

Press:

READ

The cursor will move to
the right, then the result
in mg/L anionic
surfactants (LAS) will
be displayed.

Note:

Standard Adjust may

be performed using a
prepared standard (see
Standard Adjust in
Section 1).

Note:

Acetone may be used

to clean benzene from
glassware.

SURFACTANTS, ANIONIC,

continued

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 418 / 460

Результаты поиска

Содержание DR/850

Отзывы: