manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 186 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 186

186

Sampling and Storage

Collect samples in acid-washed plastic bottles. Adjust the sample 
pH to 2 or less with nitric acid (about 5 mL per liter). Preserved 
samples can be stored up to six months. Adjust the sample pH to 

9.  

Place the blank into 

the cell holder. Tightly 
cover the sample cell with 
the instrument cap.

10.  

Press:

 

ZERO

The cursor will move to 
the right, then the 
display will show:

0.00 mg/L CaCO3 

Note:

If Reagent Blank 

Correction is on, the 
display may flash “limit”. 
See Section 1.

11.  

Place the prepared 

sample into the cell 
holder. Tightly cover the 
sample cell with the 
instrument cap.

12.  

Press: 

READ

The cursor will move to 
the right, then the result 
in mg/L magnesium 
hardness (as CaCO

3

) 

will be displayed.

13.  

Without removing 

the cell, press:

PRGM 29 ENTER

The display will show:

PRGM ?

Note:

For alternate forms 

(Ca) press the 

CONC

 key.

14.  

Press:

 

ZERO

The cursor will move to 
the right, then the 
display will show:

0.00 mg/L CaCO3

15.  

Place the third 

sample cell into the 
cell holder.

16.  

Press: 

READ

The cursor will move to 
the right, then the result 
in mg/L calcium 
hardness (as CaCO

3

) 

will be displayed.

Note:

Standard Adjust may 

be performed using a 
prepared standard (see 
Section 1).

Note:

mg/L total hardness 

= mg/L Ca as CaCO

3

 + 

mg/L Mg as CaCO

3

.

HARDNESS, 

continued

 

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов