Hach DR/850 Скачать руководство пользователя страница 333

Страница: 333 / 460

333

Method 8311

OZONE

(0 to 0.25 mg/L O

, 0 to 0.75 mg/L O

or 0 to 1.50 mg/L O

) For water

Indigo Method

(Using AccuVac Ampuls)

Enter the stored

program number for
Ozone (O

) AccuVac

ampuls.

Press:

PRGM

The display will show:

PRGM ?

Press:

72 ENTER

for low range ozone

Press:

73 ENTER

for mid range ozone

Press:

74 ENTER

for high range ozone.

The display will show

mg/L, O3

and the

ZERO

icon

Gently collect at least

40 mL of sample in a
50-mL beaker.

Note:

Samples must be

analyzed immediately and
cannot be preserved for
later analysis. See

Sampling and Storage

following these steps for
proper collection.

Collect at least 40

mL of ozone-free water
(blank) in another
50-mL beaker.

Note:

Ozone-free water

used for the blank may
be deionized water or
tap water.

Fill one Indigo

Ozone Reagent AccuVac
Ampul with the sample
and one ampul with
the blank.

Note:

Keep the tip

immersed while the
ampul fills.

Quickly invert both

ampuls several times to
mix. Wipe off any liquid
or fingerprints.

Note:

Part of the blue color

will be bleached if ozone is
present. (The sample will
be lighter than the blank.)

Place the

sample

AccuVac ampul into the
cell holder. Tightly
cover the ampul with the
instrument cap.

Note:

Standardization for

this procedure is
intentionally reversed.

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0.00 mg/L O3

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 333 / 460

Результаты поиска

Содержание DR/850

Отзывы: