manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 316 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 316

316

5.

Using an automatic 

dispenser or TenSette 
Pipet, add 1.0 mL of 
concentrated sulfuric 
acid to the mixing cell. 

Note:

Mixing concentrated 

sulfuric acid and water is 
not additive. Adding 1.0 mL 
of concentrated sulfuric 
acid to 9.0 mL of sample 
does not result in a final 
volume of 10.0 mL. This 
factor is built into the 
calibration curve.

6.

Cap the cell tightly 

and invert it several 
times. The solution will 
become hot. Cool to 
room temperature before 
proceeding.

Note:

Acidified samples 

are stable for several 
months when refrigerated 
at 4 °C.

7.

Prepare a blank (see 

note) by repeating Steps 
4-6, substituting 9.0 mL 
of deionized water for 
the sample.

Note:

The reagent blank is 

stable and can be reused. 
Verify reagent blank quality 
by measuring the 
absorbance of the blank vs. 
a clean COD vial filled 
with deionized water. The 
absorbance range, when 
using chloride removal, 
should be about 
1.31-1.36.

Note:

Use a clean pipet or 

rinse it thoroughly.

Note:

One blank must be 

run with each lot of 
reagents. Run all samples 
and blanks with the same 
lot of vials (lot number is 
on the container label).

8.

If not already on, 

turn on the DRB 200 
Reactor and heat to 
150 °C. 

Note:

See DRB 200 user 

manual for selecting pre-
programmed temperature 
applications.

PREPARE BLANK

OXYGEN DEMAND, CHEMICAL, 

continued

 

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов