Hach DR/850 Скачать руководство пользователя страница 101

Страница: 101 / 460

101

CHLORINE, FREE, Ultra-high Range

(0.0–10.0 mg/L Cl

) Method

10069

DPD Method

USEPA accepted for reporting drinking water analyses

For testing higher levels of free chlorine (hypochlorous acid

and hypochlorite) in drinking water, cooling water,

and industrial process waters

Note:

This product has not been evaluated to test for chlorine and chloramines in medical

applications in the United States.

* Procedure is equivalent to USEPA method 330.5 for wastewater and Standard Method 4500-C1-G for drinking
water.

Enter the user

program number for
Chlorine, UHR.

Press:

PRGM

The display will show:

PRGM?

Note:

If the chlorine is

typically less than 2.0 mg/
L, use method 8021,
program number 9.

Press:

12 ENTER

The display will show

mg/L Cl

then:

ZERO

Fill the 10-mL/1-cm

cell to the 5-mL line
with sample.

Place the cell into

the instrument. Cover
the sample cell tightly
with the instrument cap.

Note:

Place the cell into

the cell holder as
illustrated. The sample cell
tab should be at the 6
o’clock position and
completely seated in the
cell holder slot.

Tab

Slot

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 101 / 460

Результаты поиска

Содержание DR/850

Отзывы: