Hach DR/850 Скачать руководство пользователя страница 196

Страница: 196 / 460

196

Place the prepared

sample into the cell
holder. Tightly cover the
sample cell with the
instrument cap.

10.

Press:

READ

The cursor will move to
the right, then the result
in mg/L iron (Fe) will
be displayed.

Note:

Standard Adjust may

be performed using a
prepared standard (see
Section 1).

Using AccuVac Ampuls

Enter the stored

program number for iron
(Fe), AccuVac ampuls.

Press:

PRGM

The display will show:

PRGM ?

Note:

Adjust pH of stored

samples before analysis.

Note:

Determination of

total iron requires a
digestion prior to analysis
(see Section 2).

Press:

33 ENTER

The display will show

mg/L, Fe

and the

ZERO

icon

Fill a sample cell

(the blank) with at least
10 mL of sample.
Collect at least 40 mL of
sample in a 50-mL
beaker.

Note:

For turbid samples,

treat the blank with one
0.1 g scoop of RoVer Rust
Remover. Swirl to mix.

Place the blank into

the cell holder. Tightly
cover the sample cell
with the instrument cap.

IRON, TOTAL,

continued

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 196 / 460

Результаты поиска

Содержание DR/850

Отзывы: