manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 142 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 142

142

5.

Wipe the outside of 

the blank vial with a 
towel.

Note:

Wiping with a damp 

cloth followed by a dry one 
removes fingerprints and 
other marks.

6.

Place the blank in the 

adapter. 

Push straight down on 
the top of the vial until it 
seats solidly into the 
adapter.

Note:

Do not move the vial 

from side to side as this can 
cause errors.

7.

Cover the vial tightly 

with the instrument cap.

Press

: 

ZERO

The cursor will move to 
the right, then the 
display will show:

0.00 mg/L Cl2

Note:

If Reagent Blank 

Correction is on, the 
display may flash “limit”. 
See Section 1.

8.

Remove the cap from 

a Total Chlorine DPD-
TNT tube. Add 
10 mL of sample.

Note:

Fill to the top of the 

Hach logo “oval” mark.

Note:

A pink color will 

develop if chlorine is 
present.

9.

Cap and invert at 

least 10 times to dissolve 
the powder. This is the 
prepared sample.

Note:

Use slow, deliberate 

inversion for complete 
recovery. Ten inversions 
should take at least 
30 seconds. One inversion 
equals turning the vial 
upside down, then 
returning it to an upright 
position.

10.

Press:

TIMER ENTER

A three-minute reaction 
period will begin.

Note:

A pink color will 

develop if chlorine 
is present.

11.

When the timer 

beeps, wipe the prepared 
sample vial with a towel, 
then place it in the vial 
adapter. 

Push straight down on 
the top of the vial until it 
seats solidly into the 
adapter.

Note:

Do not move the vial 

from side to side as this can 
cause errors.

12.

Cover the vial 

tightly with the 
instrument cap.

Press: 

READ

The cursor will move to 
the right, then the result 
in mg/L total chlorine 
will be displayed.

CHLORINE, TOTAL, 

continued

 

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов