Hach DR/850 Скачать руководство пользователя страница 379

Страница: 379 / 460

379

Method 8190

PHOSPHORUS, TOTAL

(0.00 to 3.50 mg/L PO

)

For water, wastewater and seawater

PhosVer 3 with Acid Persulfate Digestion

USEPA Accepted for reporting wastewater analysis

Test ’N Tube Procedure

* Adapted from

Standard Methods for the Examination of Water and Wastewater

** Procedure is equivalent to USEPA Method 365.2 and Standard Method 4500-P B, 5 and P.E.

Turn on the DRB200

Reactor. Heat the reactor
to 150 °C.

Note:

See DRB200

instrument manual for
selecting preprogrammed
temperature applications.

Enter the stored

program number for
total phosphorus,
(PO

), Test ‘N Tube.

Press:

PRGM

The display will show:

PRGM

Note:

For most accurate

results, perform a Reagent
Blank Correction using
deionized water (see
Section 1).

Press:

82 ENTER

The display will show

mg/L, PO4

and the

ZERO

icon

Note:

For alternate forms

(P, P

), press the

CONC

key.

Insert the COD/TNT

Adapter into the cell
holder by rotating the
adapter until it drops
into place. Then push
down to fully insert it.

Note:

A diffuser band

covers the light path holes
on the adapter to give
increased performance.
The band should NOT be
removed.

Use a TenSette Pipet

to add 5.0 mL of sample
to a Total and Acid
Hydrolyzable Test Vial.

Note:

Adjust the pH of

stored samples to 6-8
before analysis.

Using a funnel, add

the contents of one
Potassium Persulfate
Powder Pillow for
Phosphonate to the vial.

Cap tightly and

shake to dissolve.

Place the vial in the

DRB200 Reactor. Heat
the vial for 30 minutes.

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 379 / 460

Результаты поиска

Содержание DR/850

Отзывы: