Hach DR/850 Скачать руководство пользователя страница 272

Страница: 272 / 460

272

Clean the outside of

the vial with a towel.
After the timer beeps,
place the blank into the
vial adapter. Tightly
cover the vial with the
instrument cap.

Note:

Wipe with a damp

cloth and follow with a dry
one to remove fingerprints
and other marks.

10.

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0 mg/L NH3-N

11.

Place the prepared

sample in the adapter.

Push straight down on
the top of the vial until it
seats solidly into the
adapter.

Note:

Do not move the vial

from side to side as this can
cause errors.

12.

Tightly cover the

vial with the instrument
cap.

13.

Press:

READ

The cursor will move to
the right, then the result
in mg/L NH

-N will

be displayed.

Note:

Standard Adjust may

be performed using a
prepared standard (see
Standard Adjust in Section 1).

NITROGEN, AMMONIA, High Range, Test 'N Tube,

continued

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 272 / 460

Результаты поиска

Содержание DR/850

Отзывы: