Hach DR/850 Скачать руководство пользователя страница 437

Страница: 437 / 460

437

Method 8237

TURBIDITY

(0 to 1000 FAU)

For water, wastewater, and seawater

Absorptometric Method

* Adapted from FWPCA

Methods for Chemical Analysis of Water and Wastes

, 275 (1969)

Enter the stored

program number for
turbidity.

Press:

PRGM

The display will show:

PRGM

Note:

1 FAU=1 NTU=1 FTU
when measuring formazin.
These are not equivalent
when measuring other
types of standards or
samples.

Press:

95 ENTER

The display will show

FAU

and the

ZERO

icon.

Fill a sample cell

with 10 mL of deionized
water (the blank).

Note:

Wipe the surface of

the cell with a soft cloth.

Note:

For highly colored

samples, use a filtered
portion of sample in place
of the deionized water.

Place the blank into

the cell holder. Tightly
cover the sample cell with
the instrument cap.

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0 FAU

Fill another sample

cell with 10 mL of
sample.

Note:

Mix the sample well

before transferring it to the
sample cell.

Note:

Wipe the surface of

the cell with a soft cloth.

Place the sample cell

into the cell holder.
Tightly cover the sample
cell with the
instrument cap.

Press:

READ

The cursor will move to
the right, then the result
in Formazin Attenuation
Units (FAU) will be
displayed.

Note:

Standard Adjust may

be performed using a
prepared standard (see
Section I).

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 437 / 460

Результаты поиска

Содержание DR/850

Отзывы: