manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 22 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 22

22

CHEMICAL ANALYSIS INFORMATION

, continued

 

Acid Washing Bottles

If a procedure suggests acid-washing, use the following instructions:

a)

Clean the glassware or plasticware with laboratory detergent 
(phosphate-free detergent is recommended). 

b)

Rinse well with tap water. 

c)

Rinse with a 1:1 Hydrochloric Acid Solution or 1:1 Nitric Acid 
Solution. 

d)

Rinse well with deionized water at least four times. Up to 12-15 
rinses may be necessary if chromium is being determined. 

e)

Air dry. 

Use chromic acid or chromium-free substitutes to remove organic 
deposits from glass containers. Rinse containers thoroughly with water to 
remove traces of chromium.

Wash glassware for phosphate determinations with phosphate-free 
detergents and acid-wash with 1:1 HCl. Thoroughly rinse the glassware 
with deionized water. For ammonia and Kjeldahl nitrogen, rinse with 
ammonia-free water.

Correcting for Volume Additions

If you use a large volume of preservative, correct for the volume of 
preservative added. This accounts for dilution due to the acid added to 
preserve the sample and the base used to adjust the pH to the range of the 
procedure. This correction is made as follows:

1.

Determine the volume of initial sample, the volume of acid and base 
added, and the total or final volume of the sample.

2.

Divide the total volume by the initial volume of sample.

3.

Multiply the test result by this factor.

Example:

A one-liter sample was preserved with 2 mL of nitric acid. It was 
neutralized with 5 mL of 5 N sodium hydroxide. The result of the analysis 
procedure was 10.00 mg/L. What is the volume correction factor and 
correct result?

1.

 

2.

3.

Total Volume

1000 mL

2 mL

5 mL

+

+

1007 mL

=

=

1007
1000

------------

1.007

volume correction factor

=

=

10.0 mg/L

1.007

×

10.07 mg/L

correct result

=

=

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов