manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 236 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 236

236

5.  

Press: 

TIMER ENTER

A one-minute reaction 
period will begin.  Shake 
the sample cell 
vigorously until the 
timer beeps.

Note:

It is important to 

shake the cell vigorously. 
Shaking time and technique 
influence color 
development. For most 
accurate results, do 
successive tests on a 
standard solution and 
adjust the shaking time to 
obtain the correct result. 

6.  

After the timer beeps, 

the display will show: 

5:00

 

TIMER 2 

Press: 

ENTER

A five-minute reaction 
period will begin.

Note:

A deposit will remain 

after the reagent dissolves 
and will not affect test 
results.

Note:

An amber color will 

develop if nitrate nitrogen 
is present.

7.  

Fill another cell with 

10 mL of sample (the 
blank). Wipe off any 
fingerprints or liquid.

8.  

Place the blank into 

the cell holder. Tightly 
cover the sample cell 
with the instrument cap.

9.  

When the timer 

beeps, press 

ZERO.

The cursor will move to 
the right, then the 
display will show:

0.0 mg/L NO3-N

Note:

If Reagent Blank 

Correction is on, the 
display may flash “limit”. 
See Section 1.

10.  

Place the prepared 

sample into the cell 
holder. Tightly cover the 
sample cell with the 
instrument cap.

11.  

Press: 

READ

The cursor will move to 
the right, then the result 
in mg/L NO

3

-N (or 

alternate form) will 
be displayed.

Note:

Use of the Standard 

Adjust feature for each new 
lot of reagent is highly 
recommended. See 

Accuracy Check

.

Note:

Rinse the sample cell 

immediately after use to 
remove all cadmium 
particles. Save the spent 
sample for proper 
hazardous waste disposal 
for cadmium.

NITRATE, High Range, 

continued

 

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов