Hach DR/850 Скачать руководство пользователя страница 72

Страница: 72 / 460

The display will

show:

00:30 Timer 2

Press:

ENTER

A thirty-second reaction
period will begin.
Vigorously shake the
cylinder for the 30-
second period.

Note:

This solution should

turn a light to medium
orange upon bleaching. It
will not become colorless.

10.

Pour the 25 mL of

mixture in the cylinder
into a second 25-mL
sample cell (the blank).

11.

The display will

show:

15:00 TIMER 3

Press:

ENTER

A 15-minute reaction
period will begin.

12.

Within three

minutes after the timer
beeps, place the blank
into the cell holder.
Tightly cover the sample
cell with the instrument
cap.

13.

Press:

ZERO

The cursor will move to
the right, then the
display will show:

0.000 mg/L Al

Note:

If Reagent Blank

Correction is on, the
display may flash “limit”.
See Section 1.

14.

Immediately place

the prepared sample into
the cell holder. Tightly
cover the sample cell
with the
instrument cap.

15.

Press:

READ

The cursor will move to
the right, then the result
in mg/L aluminum will
be displayed.

Note:

Clean the graduated

cylinder and sample cells
with soap and brush
immediately following
the test.

Note:

Standard Adjust may

be performed using a
prepared standard (see
Section 1).

ALUMINUM,

continued

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 72 / 460

Результаты поиска

Содержание DR/850

Отзывы: