manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 113 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 113

113

Summary of Method

The range of analysis using the DPD method for total chlorine 
can be extended by adding more indicator in proportion to sample 
volume. Thus, a larger fill powder pillow of DPD Total Chlorine 
Reagent is added to a 5-mL sample portion.

The combined chlorine oxidizes iodide in the reagent to iodine. 
The iodine reacts with DPD (N,N-diethyl-p-phenylenediamine) 
along with free chlorine present in the sample to form a pink 
color which is proportional in intensity to the total chlorine 
concentration.

Instrument Setup

The following procedure will add this method as a new Hach 
program to a DR/800 instrument.

1.

Turn on the instrument by pressing the 

ON

 key.

2.

Press the 

SETUP

 key.

3.

Press the 

DOWN

 arrow key until the prompt line shows 

USER.

4.

Press the 

ENTER

 key.

5.

Enter “8138”, followed by 

ENTER

.

6.

Key the number in the “Enter” column corresponding to line 
number 1 on the display. Press 

ENTER

. Repeat for lines 2–56 

on the display.

Manganese, oxidized (Mn

4+

, 

Mn

7+

) or Chromium, oxi-

dized (Cr

6+

)

1.

Adjust sample pH to 6–7.

2.

Add 2 drops Potassium Iodide (30 g/L) to a 5-mL sample.

3.

Mix and wait 1 minute.

4.

Add 2 drops of Sodium Arsenite (5 g/L) and mix.

5.

Analyze the treated sample as described in the procedure.

6.

Subtract the result from this test from the original analysis to obtain the 
correct chlorine concentration.

Ozone

Interferes at all levels

Peroxides

May interfere

Extreme sample pH or highly 
buffered samples

Adjust the sample pH to 6–7 with Sulfuric Acid or Sodium Hydroxide

Interfering Substance

Interference Levels and Treatments

CHLORINE, TOTAL, Ultra-High Range, continued 

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов