Hach DR/850 Скачать руководство пользователя страница 381

Страница: 381 / 460

381

17.

Press:

TIMER ENTER

A 2-minute waiting
period will begin.

Note:

Read samples

between 2 and 8 minutes
after the addition of the
PhosVer 3 reagent.

Note:

A blue color will

form if phosphate is
present.

18.

After the timer

beeps, clean the outside
of the sample vial with
a towel.

Note:

Wiping with a damp

towel, followed by a dry
one, will remove
fingerprints or other marks.

19.

Place the prepared

sample vial in the
adapter.

Push straight down on
the top of the vial until it
seats solidly into the
adapter.

Note:

Do not move the vial

from side to side as this can
cause errors.

20.

Tightly cover the

vial with the instrument
cap.

21.

Press:

READ

The cursor will move to
the right, then the result
in mg/L phosphate
(PO

) will be

displayed.

Note:

Standard Adjust may

be performed using a
prepared standard (see
Section 1).

IMPORTANT NOTE:

The test range for total
phosphate is limited to
0 to 3.5 mg/L PO

Values above 3.5 mg/L
may be used to estimate
dilution ratios, but
should NOT be used for
reporting purposes. If a
value above 3.5 mg/L
PO

is obtained, dilute

the sample and repeat
the digestion and the
colorimetric test.

PHOSPHORUS, TOTAL,

continued

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 381 / 460

Результаты поиска

Содержание DR/850

Отзывы: