Hach DR/850 Скачать руководство пользователя страница 190

Страница: 190 / 460

190

Place the prepared

sample into the cell
holder. Tightly cover the
sample cell with the
instrument cap.

10.

Press:

READ

The cursor will move to
the right, then the result
in mg/L ferrous iron will
be displayed.

Note:

Standard Adjust may

be performed using a
prepared standard (see
Section 1).

Using AccuVac Ampuls

Enter the stored

program number for
ferrous iron (Fe

)

AccuVac ampuls.

Press:

PRGM

The display will show:

PRGM

Note:

Analyze samples as

soon as possible to prevent
air oxidation of ferrous iron
to ferric, which is not
determined.

Press:

33 ENTER

The display will show

mg/L, Fe

and the

ZERO

icon.

Fill a sample cell

with at least 10 mL of
sample (the blank).
Collect at least 40 mL of
sample in a 50-mL
beaker.

Place the blank into

the cell holder. Tightly
cover the sample cell
with the instrument cap.

IRON, FERROUS,

continued

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 190 / 460

Результаты поиска

Содержание DR/850

Отзывы: