manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 342 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 342

342

5.

Add the contents of 

one Potassium 
Persulfate for 
Phosphonate Powder 
Pillow to the cell labeled 
as “sample”. Swirl to 
mix. This cell contains 
the prepared sample.

6.

Insert the ultraviolet 

(UV) lamp into the 
prepared sample.

Note:

Wear UV safety 

goggles while the lamp is on.

Note:

Do not handle the 

lamp surface. Fingerprints 
will etch the glass. Wipe 
lamp with a soft, clean 
tissue between samples. Do 
not use detergents with 
phosphates to wash 
glassware.

Note:

A specially designed 

cord adapter is available 
for performing two 
digestions with a single 
power supply. A second UV 
lamp is required.

7.

Turn on the UV lamp 

to digest the prepared 
sample. 

Press: 

TIMER ENTER

A 10-minute reaction 
period will begin.

Note:

Phosphonates are 

converted to ortho- 
phosphate in this step.

Note:

The digestion step 

may take less time. 
Contaminated samples or a 
weak lamp could result in 
incomplete digestion. 
Check efficiency by 
running a longer digestion 
to see if readings increase.

8.

When the timer 

beeps, turn off the UV 
lamp. Remove it from 
the sample cell.

PHOSPHONATES, 

continued

 

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов