manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 360 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 360

360

5.

Add 2.0 mL of 

5.0 N Sodium 
Hydroxide Solution to 
the prepared sample. 
Swirl to mix. 

Note:

Use the 1-mL 

calibrated dropper 
provided.

6.

Pour the prepared 

sample into a graduated 
cylinder. Add deionized 
water rinsings from the 
flask to return the 
volume to 25 mL. 
Proceed with the 
appropriate reactive 
phosphorus test.

Note:

Results of the 

reactive phosphorus test at 
this point will include the 
orthophosphate plus the 
acid-hydrolyzable 
(condensed) phosphate. 
The condensed phosphate 
concentration is 
determined by subtracting 
the results of a reactive 
phosphorus test on an 
untreated sample from this 
result. Make sure both 
results are in the same 
chemical form and units.

PHOSPHORUS, ACID HYDROLYZABLE, 

continued

 

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов