manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 237 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 237

237

Using AccuVac Ampuls

1.  

Enter the stored 

program number for 
high range nitrate 
nitrogen (NO

3

¯–N) 

AccuVac Ampuls.

Press: 

PRGM

The display will show:

PRGM

?

Note:

For most accurate 

results, perform a Reagent 
Blank Correction using 
deionized water (see 
Section 1).

2.  

Press:

 

50 ENTER

The display will show 

mg/L, NO3-N 

and the

 

ZERO 

icon.

Note:

For alternate forms 

(NO

3

), press the 

CONC

 key.

3.  

Collect at least 40 

mL of sample in a 
50-mL beaker.  Fill a 
NitraVer 5 Nitrate 
AccuVac Ampul with 
sample. Place a stopper 
over the tip of the ampul.

Note:

Keep the tip immersed 

while the ampul fills. The 
ampul will not fill 
completely.

Note:

Adjust the pH of 

stored samples before 
analysis.

4.  

Press: 

TIMER ENTER

A one-minute mixing 
period will begin. Invert 
the ampul repeatedly 
back and forth until the 
timer beeps. Wipe off 
any liquid or fingerprints.

Note:

Mixing time and 

technique influence color 
development. For most 
accurate results, do 
successive tests on a 
standard solution and 
adjust the mixing time to 
obtain the correct result.

5.  

The display will 

show: 

5:00

 

TIMER 2

Press:

 ENTER

A five-minute reaction 
period will begin.

Note:

A deposit will remain 

after the reagent dissolves 
and will not affect results.

Note:

An amber color will 

develop if nitrate nitrogen 
is present.

6.  

Fill a sample cell 

with at least 10 mL of 
sample (the blank).

7.  

When the timer 

beeps, place the blank in 
the cell holder. Tightly 
cover the sample cell 
with the instrument cap.

8.  

Press:

 

ZERO

The cursor will move to 
the right, then the 
display will show:

0.0 mg/L NO3-N

Note:

If Reagent Blank 

Correction is on, the 
display may flash “limit”. 
See Section 1.

NITRATE, High Range, 

continued

 

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов