Hach DR/850 Скачать руководство пользователя страница 141

Страница: 141 / 460

141

Method 10101

CHLORINE, TOTAL

(0 to 5.00 mg/L)

For water, wastewater and seawater

DPD Test ‘N Tube

™

Method

Note:

This product has not been evaluated to test for chlorine and chloramines in medical

applications in the United States.

* Adapted from

Standard Methods for the Examination of Water and Wastewater

Enter the stored

program number for
Test ‘N Tube total
chlorine (Cl

Press:

PRGM

The display will show:

PRGM

Note:

For most accurate

results, perform a Reagent
Blank Correction using
deionized water (see
Section 1).

Press:

10 ENTER

The display will show

mg/L, Cl2

and the

ZERO

icon

Insert the COD/TNT

Vial Adapter into the
cell holder by rotating
the adapter until it drops
into place. Then push
down to fully insert it.

Note:

For increased

performance, a diffuser
band covers the light path
holes on the adapter. Do
not remove the diffuser
band.

Fill an empty Test ‘N

Tube vial with sample
(the blank).

Note:

Fill to the top of the

Hach logo “oval” mark.

Note:

Samples must be

analyzed immediately and
cannot be preserved for
later analysis.

Содержание DR/850












































































































































































































































































































































































































































































Результаты поиска

Содержание DR/850

Отзывы:

Hach DR/850, Руководство по процедурам, Страница: 141 / 460

Результаты поиска

Содержание DR/850

Отзывы: