manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 128 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 128

128

Sampling and Storage

Analyze samples for chlorine 

immediately

 after collection. Free 

chlorine is a strong oxidizing agent, and it is unstable in natural 
waters. It reacts rapidly with various inorganic compounds and 
more slowly oxidizes organic compounds. Many factors, 
including reactant concentrations, sunlight, pH, temperature and 
salinity influence decomposition of chlorine in water.

Avoid plastic containers

 since these may have a large chlorine 

demand. 

Pretreat glass

 sample containers to remove any 

chlorine demand by soaking in a dilute bleach solution (1 mL 
commercial bleach to l liter of deionized water) for at least 1 
hour. Rinse thoroughly with deionized or distilled water. If 
sample containers are rinsed thoroughly with deionized or 
distilled water after use, only occasional pre-treatment is 
necessary.

9.  

When the timer 

beeps, place the 
AccuVac Ampul into the 
cell holder. Tightly 
cover the ampule with 
the instrument cap.

10.  

Press: 

READ

The cursor will move to 
the right, then the result 
in mg/L total chlorine 
will be displayed.

Note:

If the sample 

temporarily turns yellow 
after sample addition, or 
the display shows “limit”, 
it is due to high chlorine 
levels. Dilute a fresh 
sample and repeat the test. 
A slight loss of chlorine 
may occur during dilution. 
Multiply the result by the 
appropriate dilution factor; 
see Section 1.

Note:

Standard Adjust may 

be performed using a 
prepared standard (see 
Section 1).

CHLORINE, TOTAL, 

continued

 

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов