manualshive.com logo in svg

Hach DR/850, Руководство по процедурам, Страница: 388 / 460

Поделиться
Скачать
Hach DR/850 Скачать руководство пользователя страница 388

388

Sampling and Storage

Collect samples in clean plastic or glass bottles that have been 
cleaned with 1:1 Hydrochloric Acid Solution and rinsed with 
deionized water.  Do not use a commercial detergent containing 
phosphate for cleaning glassware used in this test.

5.

Add 1 mL of Amino 

Acid Reagent Solution. 
Cap and invert several 
times to mix (the 
prepared sample).

Note:

A blue color will 

form if phosphate is present.

Note:

You may substitute 

the contents of one Amino 
Acid Reagent Powder 
Pillow for 1 mL of Amino 
Acid Reagent Solution. 

6.

Press: 

 TIMER ENTER

A 10-minute reaction 
period will begin.

Note:

Perform Step 7 while 

the timer is running.

7.

Pour 25 mL of 

sample (the blank) into a 
sample cell.

8.

When the timer 

beeps, the display 
will show:

mg/L PO4

Place the blank into the 
cell holder. Cover the 
sample cell with the 
instrument cap.

9.

Press:

 

ZERO

The cursor will move to 
the right, then the 
display will show:

0.0 mg/L PO4

Note:

If Reagent Blank 

Correction is on, the 
display may flash “limit”. 
See Section 1.

10. 

Place the prepared 

sample into the cell 
holder. Tightly cover the 
sample cell with the 
instrument cap.

11.

 Press: 

READ

The cursor will move to 
the right, then the result 
in mg/L PO

4

 will 

be displayed.

Note:

Standard Adjust may 

be performed using a 
prepared standard (see 
Section 1).

PHOSPHORUS, REACTIVE, 

continued

 

Содержание DR/850













































































































































































































































































































































































































































































Отзывы:

Нет отзывов