GE LPS-D, Инструкция по эксплуатации

Страница: 376 / 436

B-
42
LPS-D Line Protection System GE Power Management
B.1 MEMORY MAPPING APPENDIX B
B
089 “PROTECTION TURNED ON”
090 “FAULTS RESET”
091 “EVENTS RESET”
092 “OST OSCILLOGRAPHY RESET”
093 “EQUIPMENT DUTY RESET”
094 “ACTIVE SETTING GROUP CHANGED”
095 “PROTECTION REINITIALIZATION SERVICED”
096 “PROTECTION REINIT NOT SERVICED”
097 “FACTORY SETTING DONE”
098 “ERR – CONTANTS USED FOR PROT”
099 “ERR – CONFIG LOGIC CODE AREA”
100 “INITIALIZED, LPS INITIALIZED”
101 to 104
105 “TRIP SIGNALS ON”
106 “TRIP SIGNALS RESET”
107 “TRIP A SIGNAL ON”
108 “TRIP A SIGNAL RESET”
109 “TRIP B SIGNAL ON”
110 “TRIP B SIGNAL RESET”
111 “TRIP C SIGNAL ON”
112 “TRIP C SIGNAL RESET”
113 “OUT OF STEP BLOCK ON”
114 “OUT OF STEP BLOCK OFF”
115 “BREAKER #1 OPEN”
116 “BREAKER #1 CLOSED”
117 “BREAKER #2 OPEN”
118 “BREAKER #2 CLOSED”
119 “FUSE FAILURE ALARM ON”
120 “FUSE FAILURE ALARM OFF”
121 “RECEIVE CARRIER ON”
122 “RECEIVE CARRIER OFF”
123 “KEY TRANSMITTER ON”
124 “KEY TRANSMITTER OFF”
125 “TRIP CIRCUIT #1 ENERGIZED”
126 “TRIP CIRCUIT #2 ENERGIZED”
127 “TRIP CIRCUIT #3 ENERGIZED”
128 “TRIP CIRCUIT #4 ENERGIZED”
129 “TRIP CIRCUIT #5 ENERGIZED”
130 “TRIP CIRCUIT #6 ENERGIZED”
Table B–5: FORMAT CODES
(Sheet 11 of 13)
TYPE VALUE / BIT MASK DESCRIPTION