GE LPS-D, Инструкция по эксплуатации

Страница: 134 / 436

2-
68
LPS-D Line Protection System GE Power Management
2.5 REFERENCE TABLES 2 CALCULATION OF SETTINGS
2
1831 S Y N C M A N C LS Supervise Manual Close YES, NO NO
1832 VBUSLIVE Live Bus Voltage 0.1 to 130 volts step 0.1 50 V
1833 VBUSDEAD Dead Bus Voltage 0.1 to 130 volts step 0.1 50 V
1834 VLINELIVE Live Line Voltage 0.1 to 130 volts step 0.1 50 V
1835 VLINEDEAD Dead Line Voltage 0.1 to 130 volts step 0.1 50 V
1836 LBUSDLINE Live Bus Dead Line YES, NO NO
1837 DBUSLLINE Dead Bus Live Line YES, NO NO
1838 DBUSDLINE Dead Bus Dead Line YES, NO NO
1839 DELTAV Voltage Difference 0.1 to 130 volts step 0.1 10 V
1840 DELTAVBLK Block Synch Check by DELTAV YES, NO NO
NONCRIT_AL (IN ADDITION TO SELF-TEST ALARMS)
1901 N C A IN 1 Non-Critical Alarm Input #1
These 8 inputs are ORed
together and then outputted to
the contact assigned to the
Non-Critical Alarm 0 to 256 step 1 48
1902 NCAIN2 Non-Critical Alarm Input #2 0 to 256 step 1 49
1903 NCAIN3 Non-Critical Alarm Input #3 0 to 256 step 1 50
1904 NCAIN4 Non-Critical Alarm Input #4 0 to 256 step 1 51
1905 NCAIN5 Non-Critical Alarm Input #5 0 to 256 step 1 0
1906 NCAIN6 Non-Critical Alarm Input #6 0 to 256 step 1 0
1907 NCAIN7 Non-Critical Alarm Input #7 0 to 256 step 1 0
1908 NCAIN8 Non-Critical Alarm Input #8 0 to 256 step 1 0
OUTPUTS
2001 T 1 T1 Contract 0 to 256 step 1 33
2002 T2 T2 Contact 0 to 256 step 1 34
‡
; 33
^
2003 T3 T3 Contact 0 to 256 step 1 35
‡
; 33
^
2004 T4 T4 Contact 0 to 256 step 1 33
‡
2005 T5 T5 Contact 0 to 256 step 1 34
‡
2006 T6 T6 Contact 0 to 256 step 1 35
‡
2007 A1 A1 Contact (configurable) 0 to 256 step 1 33
‡
; 58
^
Table 2–8: PROTECTION SETTINGS GUIDE (Sheet 8 of 9)
No.
M nem onic
Description Range (5A) Range (1A) Default
†
Setting/value is applicable to LPS-D Revision B models only.
‡
Setting/value is applicable LPS-D Single Phase Tripping models only.
^ Setting/value is applicable to LPS-D Three Phase Tripping models only.