GE LPS-D, Инструкция по эксплуатации

Страница: 375 / 436

GE Power Management LPS-D Line Protection System B-
41
APPENDIX B B.1 MEMORY MAPPING
B
035 “i960 INSTRUCTION FAULT OCCURED”
036 “i960 ARITHMETIC INSTRUCTION FAULT”
037 “TOO MANY BOGUS INTERRUPTS”
038 “FAIL– DSP DPRAM CHECKSUM”
039 to 042
043 “WARN – CPU BOARD TIMER TEST”
044 “WARN – ZERO CROSSING LOGIC”
045 “WARN – CAPRAM FAILURE”
046 “WARN – RTC TEST FAILURE”
047 “WARN – COMM FRONT PORT FAILURE”
048 “WARN – COMM REAR PORT 1 FAILURE”
049 “WARN – COMM REAR PORT 2 FAILURE”
050 “WARN – WATCHDOG TIMER FAILED”
051 “WARN – LCD DISPLAY FAILURE”
052 “WARN – IRIGB FAILED”
053 “WARN – H/W MISMATCH - REAR PORT 2 ABSENT”
054 “WARN – NON CRIT FIELD IN MODEL NUM ERROR”
055 “WARN – CAPRAM SIZE MISMATCH”
056 “WARN – FREQUENCY OUT OF RANGE”
057 “WARN – WARM RESTART”
058 to 061
062 “ANI REFERENCE CORRECTED”
063 “DIGITAL INPUT ERROR CORRECTED”
064 “MAG MODULE ERROR CORRECTED”
065 “ANI MODULE ERROR CORRECTED”
066 “LCD DISPLAY ERROR CORRECTED”
067 to 076
077 “LOGIN FAILED”
078 “PASSWORD CHANGE”
079 “ENABLE OUTPUTS”
080 “DISABLE OUTPUTS”
081 “MANUAL TRIP”
082 “MANUAL CLOSE”
083 “ATTEMPTED MANUAL TRIP FAILED”
084 “ATTEMPTED MANUAL CLOSE FAILED”
085 “MANUAL RECLOSER RESET”
086 “SETTINGS CHANGE STARTED”
087 “SETTINGS CHANGE DONE”
088 “PROTECTION TURNED OFF”
Table B–5: FORMAT CODES
(Sheet 10 of 13)
TYPE VALUE / BIT MASK DESCRIPTION