background image

1

New Product

Single-phase Current Relay

K8DT-AS

Detect errors in motors and other equipment 
through current changes.
Use in either overcurrent or undercurrent mode.

• Monitor AC or DC currents with one Relay.

• Use with commercially available CTs (CT secondary side: 0 to 1 A or 0 to 5 A).

• Settings for the operating value, hysteresis, startup lock time, and operating time.

• Width of 17.5 mm to reduce space required in panels.

• Push-In Plus Technology that reduce wiring work.

Double-insertion holes for crossover wiring (all terminals).

• UL listed for easy shipping to North America.

• Models added with transistor outputs for superior contact reliability.

• RoHS compliant.

Ordering Information

Single-phase Current Relay

*

The K8DT-AS3

@@

 is designed to be used in combination with an OMRON K8AC-CT200L Current Transformer (CT). (Direct input is not possible.)

OMRON CT

Commercially Available CTs 

*

*

If you use a commercially available CT, do not exceed the overload 
capacity of the K8DT-AS2.

Options (Order Separately)

Front Cover

Refer to 

Safety Precautions

 on page 10

Refer to page 9 for commonly asked questions.

For the most recent information on models 
that have been certified for safety 
standards, refer to your OMRON website.

Setting range

Power supply voltage

Output

Model

2 to 20 mA AC/DC, 

10 to 100 mA AC/DC, 

50 to 500 mA AC/DC

24 VAC/DC

Relay: SPDT contact output

K8DT-AS1CD

Transistor: Open collector

K8DT-AS1TD

100 to 240 VAC

Relay: SPDT contact output

K8DT-AS1CA

Transistor: Open collector

K8DT-AS1TA

0.1 to 1 A AC/DC, 

0.5 to 5 A AC/DC

24 VAC/DC

Relay: SPDT contact output

K8DT-AS2CD

Transistor: Open collector

K8DT-AS2TD

100 to 240 VAC

Relay: SPDT contact output

K8DT-AS2CA

Transistor: Open collector

K8DT-AS2TA

10 to 100 A AC 

*

20 to 200 A AC 

*

 

24 VAC/DC

Relay: SPDT contact output

K8DT-AS3CD

Transistor: Open collector

K8DT-AS3TD

100 to 240 VAC

Relay: SPDT contact output

K8DT-AS3CA

Transistor: Open collector

K8DT-AS3TA

Appearance

Input range

Applicable 

Relay

Model

10 to 100 A AC, 

20 to 200 A AC

K8DT-AS3

K8AC-CT200L

Appearance

CT current on secondary 

side

Applicable Relay

0 to 1 A AC,

0 to 5 A AC

K8DT-AS2

Appearance

Model

Y92A-D1A

Содержание K8DT-AS Seriesl

















Отзывы: