Error solving manual.
CNC 8060
CNC 8065
·99·
(R
EF
: 1709)
1956
'Zero finishing tool radius'
DETECTION
During the execution of the cycle.
CAUSE
The finishing tool radius is 0.
SOLUTION
Correct the value of the tool radius in the tool table or select another tool.
1957
'Zero semi-finishing tool radius'
DETECTION
During the execution of the cycle.
CAUSE
The semi-finishing tool radius is 0.
SOLUTION
Correct the value of the tool radius in the tool table or select another tool.
1958
'Roughing tool radius too large'
DETECTION
During the execution of the cycle.
CAUSE
The roughing tool radius is too large for the geometry of the pocket.
SOLUTION
Correct the value of the tool radius in the tool table or select another tool.
1959
'Finishing tool radius too large'
DETECTION
During the execution of the cycle.
CAUSE
The finishing tool radius is too large for the geometry of the pocket.
SOLUTION
Correct the value of the tool radius in the tool table or select another tool.
1960
'Semi-finishing tool radius too large'
DETECTION
During the execution of the cycle.
CAUSE
The semi-finishing tool radius is too large for the geometry of the pocket.
SOLUTION
Correct the value of the tool radius in the tool table or select another tool.
1961
'Wrong finishing tool tip radius'
DETECTION
During the execution of the cycle.
CAUSE
The tip radius (Rp) of the finishing tool is greater than its radius ( R ).
SOLUTION
Correct the tool tip (nose) radius.
1962
'Wrong roughing penetration angle'
DETECTION
During the execution of the cycle.
CAUSE
The roughing penetration angle is not between 0º and 90º.
SOLUTION
Correct the penetration angle; program a value between 0º and 90º.
1963
'Wrong semi-finishing penetration angle'
DETECTION
During the execution of the cycle.
CAUSE
The semi-finishing penetration angle is not between 0º and 90º.
SOLUTION
Correct the penetration angle; program a value between 0º and 90º.
1964
'A roughing pass has been programmed greater than tool diameter'
DETECTION
During the execution of the cycle.
CAUSE
The roughing pass is greater than tool diameter.
SOLUTION
Correct the location code (tool shape) or select another tool.
1965
'A finishing pass has been programmed greater than tool diameter'
DETECTION
During the execution of the cycle.
CAUSE
The finishing pass is greater than tool diameter.
SOLUTION
Correct the location code (tool shape) or select another tool.
1966
'Wrong type of finishing'
DETECTION
During the execution of the cycle.
CAUSE
The type of finishing is wrong.
SOLUTION
Assign a correct value to the parameters.
1967
'Wrong Z coordinate of the starting plane'
DETECTION
During the execution of the cycle.
CAUSE
The Z coordinate of the beginning of the cycle is located inside the part.
SOLUTION
The Z coordinate of the beginning of the cycle must be above the reference plane.
Содержание 8065
