Tandberg 3000 MXP
C
ONNECTING THE
3000
MXP
I
NPUTS AND
O
UTPUTS
1.
Connect Line Output B of the Vortex Device to the 3000 MXP codec mixer Input 3 as
shown below using the attached RCA cable.
2.
Connect Line Input B of the Vortex Device to one side of an RCA Y (one male to two
female) adapter connected to the Main line level Output 1 of the 3000 MXP codec as
shown below using the other attached RCA cable.
3.
Connect the other side of the RCA Y adapter to the Audio or Speaker input of the
amplifier or video display to hear the far end audio using a RCA (male to male).
See next page for Tandberg settings.
