Tandberg 6000 MXP
C
ONNECTING THE
6000
MXP
I
NPUTS AND
O
UTPUTS
1.
Connect Line Output D of the Vortex Device to the 6000 MXP codec mixer Input 4 as
shown below using the attached RCA cable.
2.
Connect Line Input C of the Vortex Device to the Main line level Output 1 of the 6000
MXP codec as shown below using the other attached RCA cable.
3.
Connect Line Output 1 to the Audio or Speaker input of the amplifier or video display to
hear the far end audio using the final attached cable.
See next page for Tandberg settings.
