Fagor 8065, Руководство по устранению ошибок

Страница: 96 / 220

Error solving manual.
CNC 8060
CNC 8065
·96·
(R
EF
: 1709)
1909 'Zero roughing pass'
DETECTION During the execution of the cycle.
CAUSE The value of the machining pass is 0.
SOLUTION Define a machining pass greater than 0.
1910 'Roughing pass greater than cutter width'
DETECTION During the execution of the cycle.
CAUSE The roughing pass is greater than cutter width.
SOLUTION Program a roughing pass smaller or equal to the cutter width.
1911 'Wrong location code (shape code) in profile roughing cycle'
DETECTION During the execution of the cycle.
CAUSE The location code (tool shape) is not valid for the programmed cycle.
SOLUTION Correct the location code (tool shape) or select another tool.
1912 'Wrong cutter angle'
DETECTION During the execution of the cycle.
CAUSE The cutter angle is not valid for the programmed cycle.
SOLUTION Correct the cutter angle or select another tool.
1913 'Wrong cutting angle of the cutter'
DETECTION During the execution of the cycle.
CAUSE The cutting angle is not valid for the programmed cycle.
SOLUTION Correct the cutting angle or select another tool.
1914 'Wrong roughing F'
DETECTION During the execution of the cycle.
CAUSE The roughing feedrate is 0.
SOLUTION Define a feedrate higher than 0.
1915 'Wrong finishing F'
DETECTION During the execution of the cycle.
CAUSE The finishing feedrate is 0.
SOLUTION Define a feedrate higher than 0.
1916 'Wrong roughing S'
DETECTION During the execution of the cycle.
CAUSE The spindle speed for the roughing operation is 0.
SOLUTION Define a speed higher than 0.
1917 'Wrong finishing S'
DETECTION During the execution of the cycle.
CAUSE The spindle speed for the finishing operation is 0.
SOLUTION Define a speed higher than 0.
1918 'The programmed profile is closed'
DETECTION During the execution of the cycle.
CAUSE The profile defined in the canned cycle is not valid because it is a closed profile.
SOLUTION Program a profile that is not closed.
1919 'The programmed profile intersects itself'
DETECTION During the execution of the cycle.
CAUSE The profile defined in the canned cycle is not valid because it intersects itself.
SOLUTION Program a profile that does not intersect itself.
1920 'No profile has been programmed'
DETECTION During the execution of the cycle.
CAUSE The profile that defines the geometry of the canned cycle has not been programmed.
SOLUTION Define the profile that defines the geometry of the cycle.