Fagor 8065, Руководство по устранению ошибок

Страница: 193 / 220

Error solving manual.
CNC 8060
CNC 8065
·193·
(R
EF
: 1709)
8471 '(WKEY)'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The instruction has not been
programmed alone in the block or it has not been programmed.
SOLUTION Refer to the 8055 manual for the correct syntax. The instruction must be programmed
alone in the block.
8472 '(WBUF <"text", expression>)'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The instruction has been
programmed wrong.
SOLUTION Refer to the 8055 manual for the correct syntax.
8473 '(SYSTEM)'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The instruction has not been
programmed alone in the block or it has not been programmed.
SOLUTION Refer to the 8055 manual for the correct syntax. The instruction must be programmed
alone in the block.
8474 'DIGIT cycle does not exist in the lathe model'
DETECTION While editing or translating a program.
CAUSE Error when programming in 8055 CNC language. The programmed function only
exists in the mill model and the program is a lathe program (pit file).
SOLUTION Change the name of the file or use the proper software.
8475 'TRACE cycle does not exist in the lathe model'
DETECTION While editing or translating a program.
CAUSE Error when programming in 8055 CNC language. The programmed function only
exists in the mill model and the program is a lathe program (pit file).
SOLUTION Change the name of the file or use the proper software.
8476 'Function without translation'
DETECTION While translating a program.
CAUSE The programmed function has no equivalent on the 8055.
SOLUTION The CNC cannot translate the function. Refer to the 8055 manual for available
functions.
8477 'Lower case letters not allowed in 8055'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The 8055 language does not admit
lower case letters.
SOLUTION Program the reserved words in upper case letters.
8478 G45 <axis1 angle1 axis2 angle2 ...>
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8479 '#TANGCTRL ON [<axis1 angle1, axis2 angle2, ...><, feedrate>]'
DETECTION During execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8480 '#TANGCTRL OFF/SUSP <[axis1, axis2, ...]'
DETECTION During execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8482 'Data missing in the block'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The programmed block is not valid
(empty block N10 type block, etc.)
SOLUTION Refer to the 8055 manual for the correct syntax.